SCHMiDT 6050

The SCHMIDT 6050 wheel loader is based on a high-quality YANMAR 4TNV98T engine with a EURO 3 emission certificate. Over 6 meters in length and almost 2 meters in width guarantees the ability to work in all conditions. The maximum lifting capacity of this type of loader is 2,600 kg. The machine supports a spoon or pallet fork. Its maximum speed is 24 km / h, the articulation angle is 40 degrees and the maximum turning radius is 7,200 mm. Our SCHMIDT 6050 loader guarantees stable operation in all conditions.

Detailed description

Model	6050
Engine Model Emissions Output power [ kw/rpm ]	Xinchai 4E30 EU Stage V 55 kW
Transmission system type	type: Hydraulic

Dimensions	mm
Overall length	6018 mm
overall height	2800
total width (without bucket)	1920 mm
minimum clearance	355 mm

Hydraulic system
Efficiency of the working pump	50 -125 l/min.
Pressure	18 Mpa
driving pump efficiency	25 l/min.
Pressure	18 Mpa

Running gear
Tire size		16/70-20
Driving speed	min / maks	10/24 km/h
Maximum pulling power		48 kN
articulation angle		40 stopnie
frame oscillation		±10 stopnie
turning radius outside the bucket		7600 mm
turning radius of the inner wheel		2400 mm
Brakes	essential	hydraulic, disc, operating on 4 wheels, dry discs
	Parking brake	disc located on the drive shaft

Load specification
Tipping load (straight)	with bucket	2600 kg
	with pallet forks	2800 kg
Tipping load (full turn)	with bucket	2300 kg
	with pallet forks	2350 kg
Rated operating capacity (SAE)	with bucket	2000 kg
	with pallet forks	2000 kg

Operational data
Standard bucket capacity	1 m³
Breakout force	50 kN
Lifting capacity at ground level	48 kN
Loader raise / lower time	5/3 sec.

Fuel tank capacity	60 l
Torque converter	15 l
Hydraulic system	50 l
Operating weight (including operator’s weight)	5500 kg

Dimensions
A	Overall height	2800 mm
B	Total width	1920 mm
C	Minimum clearance	320 mm
D	Axle base	2429 mm
E	Wheelbase	1920 mm
F	Turning radius outside the bucket	6504 mm
G	Turning radius of the inner wheel	2505 mm
6050 bucket specifications
H	Total length	6018 mm
I	Total width	1920 mm
J	Height to hinge pin	3780 mm
K	Drop height	3180 mm
L	Reach at maximum elevation	740 mm
M	Digging depth	160 mm
N	Drop angle at full lift	38 mm
O	Transport position	50 mm
6050 pallet fork specification
A1	Total length	6554 mm
B1	Height at maximum reach	1563 mm
C1	Height when fully raised	3612 mm
D1	Coverage at ground level	1080 mm
E1	Maximum range	1600 mm
F1	Reach when fully raised	490 mm